UltraHome Salt-Free Water Softener
SKU: 26044667
- Effective. Salt & Potassium Free.
- Eco-Friendly.
- Protect your Pipes, fixtures and Appliances
- Industrial Strength No-Dent Tank
- Free Shipping*
- Whole Home Systems Made to Order.
Features
certified components.
Protection you can trust. Ultimate peace of mind.
Prolong the lifespan and effectiveness of all your household fixtures and appliances – especially the ones that use hot water.
Leaves healthy minerals in (salt softeners take them out). Have softer, healthier skin and hair plus cleaner dishes and clothes. Your pets will love it too!
Works naturally. Softens water without the use of salt or harsh chemicals. Creates zero waste water. No refills. No harmful discharge into environment. No electricity.
Water in / water out install. No drain to plumb. Easy for a licensed plumbing professional.
No, that will not. The process as described above, does in fact leave the natural minerals but also physically alters so that they cannot form scale. In fact the system helps remove existing scale throughout your water system.
Our system is effective up to 450 ppm of hardness. If your hardness is higher than 450 ppm don’t fret! Call us and we can customize the amount of media to meet your unique needs.
Our system is effective up to 450 ppm of hardness. If your hardness is higher than 450 ppm don’t fret! Call us and we can customize the amount of media to meet your unique needs.
The Water Softenershould be installed and maintained by a licensed, bonded contractor. Here are instructions meant to serve as a basic guide to installation. Note: individual installation needs may vary and should be determined by a licensed, bonded contractor.
No, our salt-free system does not backwash at all. Ever. Easier to install. Easier on the environment and your pocket book!
Many! First, is you spend ZERO time and ZERO money on ongoing maintenance. No monthly salt to add. No media replacements. Typical annual maintenance costs for a salt-based softener installed in a two to three bath household of four adults is $716 between monthly salt replacement and annual media replacement. Spread over 10 years that is well over $7,000. If you run RO to remove the salt at the tap, then that cost increases. Not to mention the hassle you incur. During the same period, you have no cost and no hassle with the UltraHome Salt-free System. That’s huge!
The UltraHome Salt-free System is more environmentally friendly. You use no power and you will not waste a drop of water by back flushing. You also cannot use an ionizer with a salt-based ion exchange softener without RO and/or special equipment and filters. You can use an ionizer with the UltraHome Salt-free System.
Your water cannot be over 26 grains / 444 ppm of hardness. For installation you need to consider: a place that will not freeze; appropriate space (approximately one square foot of floor space and 5 feet of height) that is near access to the main water inlet into your home. We recommend you use a licensed plumber.
Yes! No problem using any RO. However, unlike salt-based systems which add salt which then has to be removed by RO, customers do not have to use an RO with our UltraHome Salt-free System, because we do not add salt. We recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
Yes, it will prevent them from forming hard water scale! There are no negative effects of using our Salt Free system with any existing appliance in your home. Again if you drink water from your refrigerator we recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
You get lifetime media, lifetime warranty and a lifetime of savings! A link to our warranty is here.
Yes
No, the system does not remove the healthy minerals so we don’t need to put them back in the water. That is one of the major benefits!
This system does not use power so it’s easier to install, maintain and more eco-friendly.
You need to know your hardness level. We can send you a free hardness test. Request yours here. If you are on a private water supply like a well or catchment system you should have the water analyzed first. If you own your home, you should have a well report. We offer a few testing options including one for hardness. We can help you organize testing and our WQA Experts will analyze your results. We can design / build a custom system to meet any unique need or concern.
The system is engineered to work in water pressure between 20pst to 120psi. It will work in virtually any home’s water pressure.
Reviews
Features
certified components.
Protection you can trust. Ultimate peace of mind.
Prolong the lifespan and effectiveness of all your household fixtures and appliances – especially the ones that use hot water.
Leaves healthy minerals in (salt softeners take them out). Have softer, healthier skin and hair plus cleaner dishes and clothes. Your pets will love it too!
Works naturally. Softens water without the use of salt or harsh chemicals. Creates zero waste water. No refills. No harmful discharge into environment. No electricity.
Water in / water out install. No drain to plumb. Easy for a licensed plumbing professional.
No, that will not. The process as described above, does in fact leave the natural minerals but also physically alters so that they cannot form scale. In fact the system helps remove existing scale throughout your water system.
Our system is effective up to 450 ppm of hardness. If your hardness is higher than 450 ppm don’t fret! Call us and we can customize the amount of media to meet your unique needs.
Our system is effective up to 450 ppm of hardness. If your hardness is higher than 450 ppm don’t fret! Call us and we can customize the amount of media to meet your unique needs.
The Water Softenershould be installed and maintained by a licensed, bonded contractor. Here are instructions meant to serve as a basic guide to installation. Note: individual installation needs may vary and should be determined by a licensed, bonded contractor.
No, our salt-free system does not backwash at all. Ever. Easier to install. Easier on the environment and your pocket book!
Many! First, is you spend ZERO time and ZERO money on ongoing maintenance. No monthly salt to add. No media replacements. Typical annual maintenance costs for a salt-based softener installed in a two to three bath household of four adults is $716 between monthly salt replacement and annual media replacement. Spread over 10 years that is well over $7,000. If you run RO to remove the salt at the tap, then that cost increases. Not to mention the hassle you incur. During the same period, you have no cost and no hassle with the UltraHome Salt-free System. That’s huge!
The UltraHome Salt-free System is more environmentally friendly. You use no power and you will not waste a drop of water by back flushing. You also cannot use an ionizer with a salt-based ion exchange softener without RO and/or special equipment and filters. You can use an ionizer with the UltraHome Salt-free System.
Your water cannot be over 26 grains / 444 ppm of hardness. For installation you need to consider: a place that will not freeze; appropriate space (approximately one square foot of floor space and 5 feet of height) that is near access to the main water inlet into your home. We recommend you use a licensed plumber.
Yes! No problem using any RO. However, unlike salt-based systems which add salt which then has to be removed by RO, customers do not have to use an RO with our UltraHome Salt-free System, because we do not add salt. We recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
Yes, it will prevent them from forming hard water scale! There are no negative effects of using our Salt Free system with any existing appliance in your home. Again if you drink water from your refrigerator we recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
You get lifetime media, lifetime warranty and a lifetime of savings! A link to our warranty is here.
Yes
No, the system does not remove the healthy minerals so we don’t need to put them back in the water. That is one of the major benefits!
This system does not use power so it’s easier to install, maintain and more eco-friendly.
You need to know your hardness level. We can send you a free hardness test. Request yours here. If you are on a private water supply like a well or catchment system you should have the water analyzed first. If you own your home, you should have a well report. We offer a few testing options including one for hardness. We can help you organize testing and our WQA Experts will analyze your results. We can design / build a custom system to meet any unique need or concern.
The system is engineered to work in water pressure between 20pst to 120psi. It will work in virtually any home’s water pressure.
Reviews
